Pakistan First Electric Vehicle Charger Store
Shop Filter
- EV Chargers (33)
- Home EV Chargers (29)
- Commercial EV Chargers (12)
- Power (14)
- Accessories (12)
- Home (9)
- Commercial (1)
- Relay (3)
- SPD (1)
- Charging Type (22)
-
SURGE PROTECTIVE DEVICES SPD 4 – POLE
₨48,000.00Key Features
- Prewired complete unit consisting of a base part and plug-in protection modules
- High discharge capacity due to heavy-duty zinc oxide varistors / spark gaps
- High reliability due to “Thermo Dynamic Control” SPD monitoring device
Specifications
Type DG M TT 275 FM Part No. 952 315 SPD according to EN 61643-11 / IEC 61643-11 Type 2 / Class II Nominal a.c. voltage (UN) 230 / 400 V (50 / 60 Hz) Max. continuous operating a.c. voltage [L-N] (UC) 275 V (50 / 60 Hz) Max. continuous operating a.c. voltage [N-PE] (UC) 255 V (50 / 60 Hz) Nominal discharge current (8/20 µs) (In) 20 kA Max. discharge current (8/20 µs) (Imax) 40 kA Lightning impulse current (10/350 µs) [N-PE] (Iimp) 12 kA Voltage protection level [L-N] (UP) ≤ 1.5 kV Voltage protection level [L-N] at 5 kA (UP) ≤ 1 kV Voltage protection level [N-PE] (UP) ≤ 1.5 kV Follow current extinguishing capability [N-PE] (Ifi) 100 Arms Response time [L-N] (tA) ≤ 25 ns Response time [N-PE] (tA) ≤ 100 ns Max. mains-side overcurrent protection 125 A gG Short-circuit withstand capability for max. mains-side overcurrent protection (ISCCR) 50 kArms Temporary overvoltage (TOV) [L-N] (UT) – Characteristic 335 V / 5 sec. – withstand Temporary overvoltage (TOV) [L-N] (UT) – Characteristic 440 V / 120 min. – safe failure Temporary overvoltage (TOV) [N-PE] (UT) – Characteristic 1200 V / 200 ms – withstand Operating temperature range (TU) -40 °C … +80 °C Operating state / fault indication Green / Red Number of ports 1 Cross-sectional area (min.) 1.5 mm² solid / flexible Cross-sectional area (max.) 35 mm² stranded / 25 mm² flexible For mounting on 35 mm DIN rails acc. to EN 60715 Enclosure material Thermoplastic, red, UL 94 V-0 Place of installation Indoor installation Degree of protection IP 20 Capacity 4 module(s), DIN 43880 Approvals KEMA, VDE, UL, VdS Type of remote signalling contact Changeover contact a.c. switching capacity 250 V / 0.5 A d.c. switching capacity 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A Cross-sectional area for remote signalling terminals Max. 1.5 mm² solid / flexible Weight 415 g Customs tariff number 85363030 GTIN 4013364108486 PU 1 pc(s) -
Electric Ac Current Relays EOCR – SSD
₨63,000.00body {
font-family: Arial, sans-serif;
line-height: 1.6;
}
h2 {
text-align: center;
}
.specs-table {
width: 100%;
border-collapse: collapse;
}
.specs-table th, .specs-table td {
border: 1px solid #ddd;
padding: 8px;
text-align: left;
}
.specs-table th {
background-color: #f2f2f2;
}
Model SSD Technical Specs
Protection
Protective Item Trip Time Description Over-current O-TIME Phase Loss 3 sec Locked Rotor 0.5 sec after elapse of dt 2 times OC setting value Specification
Current Setting Range Current 05 0.5 ~ 6A 30 3.0 ~ 30A 60 10 ~ 60A Starting delay time D-TIME OFF Trip time O-TIME 0.5, 1~10 sec Operating t-c characteristic Over-Current Definite Tolerance Current TIME ±5% ±5% Environment
Temperature Operation Store -20 ~60℃ -30 ~80℃ Humidity 30~85% RH Non-condensing Control Power
220 220VAC±15%, 50/60Hz 110 110VAC ±15%, 50/60Hz Output Relay
2-SPST 3A / 250VAC Resistive Insulation
Between casing and circuit Over 10MΩ, 500VDC Dielectric Strength
Between casing and circuit 2000VAC 60Hz, 1min Between open contacts 1000VAC 60Hz, 1min Between circuit 2000VAC 60Hz, 1min Reset
Manual/Electrical Installation
35mm DIN-Rail or Panel Mounting -
Electronic Over Current Relay
₨36,000.00Features:
- Over current Monitoring & Tripping: Suitable for direct use from: 0.5HP to 5HP (with 6.5A relay) and up to 40 HP (with 60A relay) or through CTs up to 500HP motors (with 6.5A relay)
- Protection against phase-loss (Single Phase operation)
- Shock Relay
- Ammeter reading
- No-Volt Relay
- UL Approved
- Mounting: Surface or DIN Rail
-
Tesla Gen 3 Wall Charger – 7kW/22kW Type 2 Tethered
₨350,000.00- Compatible with both Single and Three Phase power
- Adds up to 75 km of range per hour (refer to: Vehicle Charging Speeds)
- Auto-sensing handle for easy charge port access
- Monitor and manage charging schedule and usage via the Tesla app
- Wi-Fi connectivity for over-the-air updates, remote diagnostics, and access controls
- Versatile design suitable for indoor or outdoor use
- Variable amperage configurations depending on installation location
- Power-sharing capability with up to six Wall Connectors
- 7.3m cable length
- Four-year warranty for residential use
-
Rolec Wallpod EV Charger 22 kW – Type 2
₨350,000.00Specifications:
Key Features:
- A straightforward and cost-effective Mode 3 charger, available in 16amp or 32amp, designed for home EV charging.
- Compatibility with every Mode 3 electric vehicle, provided the driver possesses the correct lead (refer to the lead section of the One Stop website).
- Easy installation and maintenance.
- ZE Ready 1.2 Tested and Nissan Accredited.
- Competitive prices in Europe.
- OLEV approved and eligible for grants.
- IP65 weatherproof rating.
- CE Certified and BSI Certificated.
- Corrosion-resistant and UV stabilized for durability.
- Built-in overload and DC-sensitive fault current protection, ensuring safety during operation.
Design:
- Warm white base unit (customizable colors available upon request or through the WallPod Customizer)
- Green service pods (customizable colors available upon request or through the WallPod Customizer)
- Flame retardant to UL94 Flame rating at V2 for 1.5mm and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certified to BS EN 60335-1 for safe home use
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion-resistant
- UV-stabilized
- BS EN 60529: IP65 category 1 certification (weatherproof)
- Operating temperature range: 30°C to +50°C
Performance:
- Easy to install/low maintenance
- Designed for permanent installation indoors or outdoors
- Available in 16amp (3.6kW), 32amp (7.2kW), 16amp 3-phase (11kW), or 32amp 3-phase (22kW)
- Mode 3 IEC61851-1 compliant communication protocol
- Built-in LED charging status indicator
- Built-in 3-pole isolator accessible via an IP65 rated access door
- Built-in 3-pole isolator with no RCBO fault current protection (for EVWP2036 & EVWP2046)
- Delivered assembled for EVWP2036 & EVWP2046, including a 3-pole isolator with no RCBO fault current protection
- Delivered without isolator for EVWP2056 & EVWP2066, with a separate RCBO fault current protection to be installed at the source
- 400V AC / 50Hz
- Multiple supply cable entry points
Options:
- Optional facility to lock isolator access door
- Optional security key switch control (to lock the unit)
- All options available in drop-down tabs
-
Rated 5.00 out of 5
Rolec Wallpod EV Charger 11 kW – Type 2
₨300,000.00Specifications:
Key Features:
- A straightforward and cost-effective Mode 3 charger, available in 16amp or 32amp, designed for home EV charging.
- Compatibility with every Mode 3 electric vehicle, provided the driver possesses the correct lead (refer to the lead section of the One Stop website).
- Easy installation and maintenance.
- ZE Ready 1.2 Tested and Nissan Accredited.
- Competitive prices in Europe.
- OLEV approved and eligible for grants.
- IP65 weatherproof rating.
- CE Certified and BSI Certificated.
- Corrosion-resistant and UV stabilized for durability.
- Built-in overload and DC-sensitive fault current protection, ensuring safety during operation.
Design:
- Warm white base unit (customizable colors available upon request or through the WallPod Customizer)
- Green service pods (customizable colors available upon request or through the WallPod Customizer)
- Flame retardant to UL94 Flame rating at V2 for 1.5mm and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certified to BS EN 60335-1 for safe home use
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion-resistant
- UV-stabilized
- BS EN 60529: IP65 category 1 certification (weatherproof)
- Operating temperature range: 30°C to +50°C
Performance:
- Easy to install/low maintenance
- Designed for permanent installation indoors or outdoors
- Available in 16amp (3.6kW), 32amp (7.2kW), 16amp 3-phase (11kW), or 32amp 3-phase (22kW)
- Mode 3 IEC61851-1 compliant communication protocol
- Built-in LED charging status indicator
- Built-in 3-pole isolator accessible via an IP65 rated access door
- Built-in 3-pole isolator with no RCBO fault current protection (for EVWP2036 & EVWP2046)
- Delivered assembled for EVWP2036 & EVWP2046, including a 3-pole isolator with no RCBO fault current protection
- Delivered without isolator for EVWP2056 & EVWP2066, with a separate RCBO fault current protection to be installed at the source
- 400V AC / 50Hz
- Multiple supply cable entry points
Options:
- Optional facility to lock isolator access door
- Optional security key switch control (to lock the unit)
- All options available in drop-down tabs
-
Rated 5.00 out of 5
Rolec Wallpod EV Charger 7.2 kW
₨250,000.00KEY FEATURES
-
- Suitable for both domestic and commercial installations
- Plug & charge functionality, controllable via mobile app or RFID
- Universal charging socket or Type 2 tethered lead options
- Up to 7.4kW charging output
- TruePEN PME fault detection eliminates the need for an earth rod
- Integration with solar PV, battery storage, or wind turbine systems
- Compatible with Alexa and Google Assistant
- OCPP 1.6 compliant for seamless integration with any back-office system
- Over-the-air firmware/software updates for easy maintenance
- Built-in overcurrent and 6mA DC leakage protection
- Cable lock security feature, user-lockable for added safety
- Integrated RFID reader for convenient access control
- Connectivity options include 4G, Wi-Fi, and Ethernet
- White color finish
Additional Information
- Dimensions: 367mm x 179mm x 142mm
-
-
Rolec Qubev Smart – 22 kW EV Charger
₨400,000.00FUTURE-PROOF & FEATURE RICH
-
Universal charging socket or Type 2 tethered lead
-
Power rating – 22kW
-
Adjustable power rating – 10A, 13A, 16A & 32A
-
Free QUBEV Smart Wi-Fi app
-
Scheduled / off-peak charging
-
Solar compatible (single phase models only)
-
PME & residual current protection (AC 30mA Type A, DC 6mA)
-
Dynamic load balancing (CT clamp(s) & cable(s) included)
-
OCPP 1.6 compliant
-
Built-in LED charging status indicator
-
Meets UK Smart Charge Point Regulations inc. tamper security
-
Wi-Fi / Ethernet connectivity
-
IP54 & IK08 rated
-
Corrosion & fire resistant
-
CE and UKCA certified
-
Easy to install and maintain
-
Wall or post mounting options
-
OZEV grant fundable
-
3 Year warranty
-
-
Rated 5.00 out of 5
Wallbox Pulsar Max 7.2 kW EV Charger
₨350,000.00- Impressive Power:
- Provides 7.2 kW of fast-charging power for efficient and rapid charging of electric vehicles.
- Compact Design:
- Weighs only 1.3 kg, making Pulsar chargers remarkably lightweight and compact.
- Easy to handle and install.
- Universal Compatibility:
- Equipped with either Type 1 or Type 2 cables to accommodate any electric vehicle.
- Provides a versatile charging solution.
- Simplified Installation:
- No need for an earthing rod, simplifying the installation process.
- Hassle-free installation for users.
- Built-in Protection:
- Integrated PEN fault protection enhances safety.
- Ensures a secure charging experience for electric vehicle owners.
- Instant Charging Availability:
- Inclusion of a tethered cable enables instant plug-and-go charging.
- Pulsar chargers are always ready for use.
- Smart Connectivity:
- Bluetooth and WiFi connectivity for convenient control through the myWallbox app.
- Provides users with a seamless and connected experience.
- Voice Control Integration:
- Supports voice control through Amazon Alexa or Google Assistant devices.
- Allows for hands-free and user-friendly operation, embracing modern technology.
- Impressive Power:
-
Rated 5.00 out of 5
Wallbox Pulsar Max 11 kW EV Charger
₨400,000.00- Impressive Power:
- Provides 11kW of fast-charging power for efficient and rapid charging of electric vehicles.
- Compact Design:
- Weighs only 1.3 kg, making Pulsar chargers remarkably lightweight and compact.
- Easy to handle and install.
- Universal Compatibility:
- Equipped with either Type 1 or Type 2 cables to accommodate any electric vehicle.
- Provides a versatile charging solution.
- Simplified Installation:
- No need for an earthing rod, simplifying the installation process.
- Hassle-free installation for users.
- Built-in Protection:
- Integrated PEN fault protection enhances safety.
- Ensures a secure charging experience for electric vehicle owners.
- Instant Charging Availability:
- Inclusion of a tethered cable enables instant plug-and-go charging.
- Pulsar chargers are always ready for use.
- Smart Connectivity:
- Bluetooth and WiFi connectivity for convenient control through the myWallbox app.
- Provides users with a seamless and connected experience.
- Voice Control Integration:
- Supports voice control through Amazon Alexa or Google Assistant devices.
- Allows for hands-free and user-friendly operation, embracing modern technology.
- Impressive Power:
-
Smart LCD TYPE EV CHARGER – 11KW – 1 Phase – Type 1 Charger
₨250,000.00- LCD Type EV Charger
- 1-Phase / 11KW
- Type 1 Charger
- Plug-in and Charge
- RFID card
- WIFI & Bluetooth (APP)
- 4G / Ethernet
- OCPP1.6J
Product Functions:
- Swipe card start and remote stop start with rechargeable IC card
- Appoint charging function for user-demand-based automatic charging
- History record function to query charging and expense records
- Equipped with display screen for real-time SOC information and estimated full-time
- Convenient charging with plug-and-play
- Optional 4G module/Ethernet functionality
- Scan the code to charge and pay
- Mobile APP for checking charging information
- LCD Type EV Charger
-
Smart LCD TYPE EV CHARGER – 7KW – 1 Phase – Type 1 Charger
₨250,000.00- LCD Type EV Charger
- 1-Phase / 7KW
- Type 2 Charger
- Plug-in and Charge
- RFID card
- WIFI & Bluetooth (APP)
- 4G / Ethernet
- OCPP1.6J
Product Functions:
- Swipe card start and remote stop start with rechargeable IC card
- Appoint charging function for user-demand-based automatic charging
- History record function to query charging and expense records
- Equipped with display screen for real-time SOC information and estimated full-time
- Convenient charging with plug-and-play
- Optional 4G module/Ethernet functionality
- Scan the code to charge and pay
- Mobile APP for checking charging information
- LCD Type EV Charger