Filters

Days

hours

minutes

seconds

Filter By

Electronic Over Current Relay
₨36,000.00
Features:
- Over current Monitoring & Tripping: Suitable for direct use from: 0.5HP to 5HP (with 6.5A relay) and up to 40 HP (with 60A relay) or through CTs up to 500HP motors (with 6.5A relay)
- Protection against phase-loss (Single Phase operation)
- Shock Relay
- Ammeter reading
- No-Volt Relay
- UL Approved
- Mounting: Surface or DIN Rail
Add to cart
Rolec Wallpod EV Charger 22 kW – Type 2
₨350,000.00
Specifications:

Key Features:
- A straightforward and cost-effective Mode 3 charger, available in 16amp or 32amp, designed for home EV charging.
- Compatibility with every Mode 3 electric vehicle, provided the driver possesses the correct lead (refer to the lead section of the One Stop website).
- Easy installation and maintenance.
- ZE Ready 1.2 Tested and Nissan Accredited.
- Competitive prices in Europe.
- OLEV approved and eligible for grants.
- IP65 weatherproof rating.
- CE Certified and BSI Certificated.
- Corrosion-resistant and UV stabilized for durability.
- Built-in overload and DC-sensitive fault current protection, ensuring safety during operation.
Design:
- Warm white base unit (customizable colors available upon request or through the WallPod Customizer)
- Green service pods (customizable colors available upon request or through the WallPod Customizer)
- Flame retardant to UL94 Flame rating at V2 for 1.5mm and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certified to BS EN 60335-1 for safe home use
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion-resistant
- UV-stabilized
- BS EN 60529: IP65 category 1 certification (weatherproof)
- Operating temperature range: 30°C to +50°C
Performance:
- Easy to install/low maintenance
- Designed for permanent installation indoors or outdoors
- Available in 16amp (3.6kW), 32amp (7.2kW), 16amp 3-phase (11kW), or 32amp 3-phase (22kW)
- Mode 3 IEC61851-1 compliant communication protocol
- Built-in LED charging status indicator
- Built-in 3-pole isolator accessible via an IP65 rated access door
- Built-in 3-pole isolator with no RCBO fault current protection (for EVWP2036 & EVWP2046)
- Delivered assembled for EVWP2036 & EVWP2046, including a 3-pole isolator with no RCBO fault current protection
- Delivered without isolator for EVWP2056 & EVWP2066, with a separate RCBO fault current protection to be installed at the source
- 400V AC / 50Hz
- Multiple supply cable entry points
Options:
- Optional facility to lock isolator access door
- Optional security key switch control (to lock the unit)
- All options available in drop-down tabs
Add to cart
Rolec Wallpod EV Charger 7.2 kW Type 2
₨250,000.00
KEY FEATURES

Suitable for both domestic and commercial installations

Plug & charge functionality, controllable via mobile app or RFID

Universal charging socket or Type 2 tethered lead options

Up to 7.4kW charging output

TruePEN PME fault detection eliminates the need for an earth rod

Integration with solar PV, battery storage, or wind turbine systems

Compatible with Alexa and Google Assistant

OCPP 1.6 compliant for seamless integration with any back-office system

Over-the-air firmware/software updates for easy maintenance

Built-in overcurrent and 6mA DC leakage protection

Cable lock security feature, user-lockable for added safety

Integrated RFID reader for convenient access control

Connectivity options include 4G, Wi-Fi, and Ethernet

White color finish

Additional Information

Dimensions: 367mm x 179mm x 142mm
Add to cart
Smart LCD TYPE EV CHARGER – 11KW – 1 Phase – Type 1 Charger
₨250,000.00
- LCD Type EV Charger
  - 1-Phase / 11KW
  - Type 1 Charger
  - Plug-in and Charge
    
    RFID card
    
    WIFI & Bluetooth (APP)
    
    4G / Ethernet
  - OCPP1.6J
Product Functions:
- Swipe card start and remote stop start with rechargeable IC card
- Appoint charging function for user-demand-based automatic charging
- History record function to query charging and expense records
- Equipped with display screen for real-time SOC information and estimated full-time
- Convenient charging with plug-and-play
  - Optional 4G module/Ethernet functionality
  - Scan the code to charge and pay
  - Mobile APP for checking charging information
Add to cart
7.2kW Single-Phase Type1 To Type2 EV Charging Cable BS-CHC008
₨35,000.00
Category: EV Charging Cable

Tag: Single-phase

Model Name: BS-CHC008

32A Single Phase

Cable specification: 3*6.0mm²+1*0.75mm

Meet IEC 62196-2 (Mennekes, Type 2) EU European standard

Meet SAE J1772 2017 (Type 1) North American standard

TPU cable, the default length is 5m

CE, TUV certificated

BESEN 7.2kW Single Phase Type1 to Type2 EV Charging Cable is a high-quality and reliable electric vehicle (EV) charging option. This cable is designed to meet the SAE J1772 2017 (Type 1) North American standard and IEC 62196-2 (Mennekes, Type 2) EU European standard, ensuring it is compatible with a wide range of EV models. With its advanced safety features, fast charging rate, and durable design, this cable will meet all your EV charging needs.
Add to cart
3.6kW Single-Phase Type1 To Type2 EV Charging Cable BS-CHC007
₨45,000.00
CategoryEV Charging CableTagSingle-phase

Model Name: BS-CHC007

16A Single Phase

Cable specification: 3*2.5mm²+1*0.75mm²

Meet IEC 62196-2 (Mennekes, Type 2) EU European standard

Meet SAE J1772 2017 (Type 1) North American standard

TPU cable, the default length is 5m

CE, TUV certificated

BESEN 3.6kW Single Phase Type1 to Type2 EV Charging Cable is a prime solution for effortlessly charging your electric vehicle. The cable is fabricated with a durable 3*2.5mm²+1*0.5mm² robust cable that satisfies the IEC 62196-2 EU European standard. Additionally, the plug’s body design has a small angle of horizontal bending, facilitating a simpler plugging and unplugging experience. The TPU material is highly resistant to bending, thereby ensuring a longer service life for the charging cable.
Add to cart
22kW Three-Phase Type2 To Type2 EV Charging Cable BS-CHC004
₨40,000.00
Category: EV Charging Cable

Tag: Three-phase

Model Name: BS-CHC004

32A Three Phase

Cable Specification: 5*6.0mm²+1*0.75mm²

Meet IEC 62196-2 (Mennekes, Type 2) EU European standard

TPU cable, the default length is 5m

CE, TUV certificated

BESEN 22kW three-phase Type2 to Type2 EV charging cable is a prime solution for effortlessly charging your electric vehicle. The cable is fabricated with a durable 5*6.0mm²+1*0.5mm² robust cable that satisfies the IEC 62196-2 EU European standard. Additionally, the plug’s body design has a small angle of horizontal bending, facilitating a simpler plugging and unplugging experience. The TPU material is highly resistant to bending, ensuring a longer service life for the charging cable.
Add to cart
7.2kW Single-Phase Type2 To Type2 EV Charging Cable
₨40,000.00
Model Name: BS-CHC003

32A Single Phase

Cable Specification: 3*6.0mm²+1*0.75mm²

Meet IEC 62196-2 (Mennekes, Type 2) EU European standard

TPU cable, the default length is 5m

CE, TUV certificated

BESEN 7.2kW single phase type2 to type2 EV charging cable is an exceptional choice for anyone seeking a secure and reliable solution to charge their electric vehicle. This exquisitely designed charging cable complies with the IEC 62196-2 (Mennekes, Type 2) EU European standard and incorporates a cutting-edge plug monitor system susceptible to temperature variations. The plug’s monitor system can detect a rise in temperature above the established safety level. It will automatically terminate the current to prevent any hazardous incidents from occurring.
Add to cart
11kW Three-Phase Type2 To Type2 EV Charging Cable
₨40,000.00
Model Name: BS-CHC002

16A Three Phase

Cable specification of 5*2.5mm²+1*0.75mm²

Meet IEC 62196-2 (Mennekes, Type 2) EU European standard

TPU cable, the default length is 5m

CE, TUV certificated

Superior, European-standard 11kW Three-Phase Type2 EV Charging Cable, this cable is manufactured in accordance with the IEC 62196-2 (Mennekes, Type 2) EU European standard, boasting an advanced integrated design that ensures both waterproof and impact-resistant functionality. Moreover, its plug features an advanced integrated design that surpasses traditional two-piece or screw-fixed plugs, further bolstering its user-friendliness. Additionally, this cable exhibits exceptional resistance to cold and heat, remaining supple and flexible even in frigid weather conditions.
Add to cart
3.6kW Single-Phase Type2 To Type2 EV Charging Cable
₨20,000.00
After-sales Service: 1 Year Warranty

Certification: CE

Color: Black

Charing Plug: Type2

Weight: 2.5kg

IP Grade: 54

Basic Info.

Model NO.

BS-CHC001(TPU)

Charing Plug

Type2

Weight

2.5kg

IP Grade

54

Transport Package

Carton Box

Specification

40*38*8(cm)

Trademark

BESEN

Origin

China

HS Code

8504409999

Production Capacity

5000/Month

Model Name: BS-CHC001

16A Single Phase

Cable specification: 3*2.5mm²+1*0.75mm²

Meet IEC 62196-2 (Mennekes, Type 2) EU European standard

TPU cable, the default length is 5m

CE, TUV certificated

Premium quality EV charging extension cable that ensures safe and extended charging for electric vehicles. With its uniquely-designed plug terminals featuring a self-cleaning function, this type 2 to type 2 compatible extension cable prevents electric sparks, making it the ideal solution for connecting EVSE and EVs.
Add to cart

Customer Support: 0341-0408538

Electronic Over Current Relay

Features:

Rolec Wallpod EV Charger 22 kW – Type 2

Specifications:

Rolec Wallpod EV Charger 7.2 kW Type 2

KEY FEATURES

Additional Information

Smart LCD TYPE EV CHARGER – 11KW – 1 Phase – Type 1 Charger

7.2kW Single-Phase Type1 To Type2 EV Charging Cable BS-CHC008

3.6kW Single-Phase Type1 To Type2 EV Charging Cable BS-CHC007

22kW Three-Phase Type2 To Type2 EV Charging Cable BS-CHC004

7.2kW Single-Phase Type2 To Type2 EV Charging Cable

11kW Three-Phase Type2 To Type2 EV Charging Cable

3.6kW Single-Phase Type2 To Type2 EV Charging Cable

Basic Info.

EV Charging Solutions

Company

Customer Support

Resources

Company Network

Not sure which solution fits you best? No problem, we've got you covered!

© 2020 - 2025 evchargers.com.pk | All rights reserved.

After-sales Service:	1 Year Warranty
Certification:	CE
Color:	Black
Charing Plug:	Type2
Weight:	2.5kg
IP Grade:	54